Electroboffin
  • 😎VoidBot
    • All Parts
    • MK1
      • Kit Contents
        • Electronics Parts
          • Development Board
            • Arduino® UNO R3
            • Arduino® UNO R4 Minima
            • Arduino® UNO R4 WiFi®
          • 1602 LCD
          • 1602 LCD I2C Module
          • IR Sensor
          • BO Motor
          • F-F Jumper Wires
          • M-F Jumper Wires
          • M-M Jumper Wires
          • 9V Batteries
          • MG90S Servo Motor
          • 9V battery Holder
          • L293D Motor driver shield
          • HC-SR04 Ultrasonic sensor
          • 10 colors Ribbon Wire
        • 3D printed Parts
          • Chassis
          • Wheels (Art Wheel)
          • 1602 LCD Mount
          • Arduino UNO Mount
          • 9V Battery Holder Mount
          • Castor Wheel Mount
          • BO Motor Mount
          • IR Sensor Mount
          • Ultrasonic Sensor Mount
          • SG90/MG90 Servo Motor Mount
          • Raspberry Pi Mount
          • Raspberry pi camera Mount
          • H.P. 3.1
          • H.P. 3.2
          • H.P. 3.3
          • H.P. 2.2
          • M.P. 11.5
          • M.P. 6.3 L
          • M.P. 3.3 L
          • M.P. 3.3 U
          • M.P. 3.3 Z
          • Servo Connector
        • Mechanical Parts
          • Castor Wheels
          • Allen Keys
          • M3X6mm CS Screws
          • M4X8mm Screws
          • M4X10mm Screws
          • M4X12mm Screws
      • Firmware
        • Arduino
          • Arduino UNO R4 Wifi
            • Arduino IDE
              • Basics
              • Line Following Robot
              • Obstacle Avoiding Robot
              • BT Controlled Robot
              • Obstacle Avoiding robot
        • Arduino UNO R4 Wifi
        • Arduino UNO R3
  • 🤖About Me
  • 😍Sponsors
Powered by GitBook
On this page

Was this helpful?

  1. VoidBot
  2. MK1
  3. Firmware
  4. Arduino

Arduino UNO R4 Wifi

PreviousArduinoNextArduino IDE

Last updated 11 months ago

Was this helpful?

😎
Arduino IDE