# MK1

- [Kit Contents](https://wiki.electroboffin.com/voidbot/mk1/kit-contents.md): The kit contains are divided into three different categories as stated below:
- [Electronics Parts](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts.md)
- [Development Board](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/development-board.md)
- [Arduino® UNO R3](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/development-board/arduino-r-uno-r3.md)
- [Arduino® UNO R4 Minima](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/development-board/arduino-r-uno-r4-minima.md)
- [Arduino® UNO R4 WiFi®](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/development-board/arduino-r-uno-r4-wifi-r.md)
- [1602 LCD](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/1602-lcd.md)
- [1602 LCD I2C Module](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/1602-lcd-i2c-module.md)
- [IR Sensor](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/ir-sensor.md)
- [BO Motor](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/bo-motor.md)
- [F-F Jumper Wires](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/f-f-jumper-wires.md)
- [M-F Jumper Wires](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/m-f-jumper-wires.md)
- [M-M Jumper Wires](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/m-m-jumper-wires.md)
- [9V Batteries](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/9v-batteries.md)
- [MG90S Servo Motor](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/mg90s-servo-motor.md)
- [9V battery Holder](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/9v-battery-holder.md)
- [L293D Motor driver shield](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/l293d-motor-driver-shield.md)
- [HC-SR04 Ultrasonic sensor](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/hc-sr04-ultrasonic-sensor.md)
- [10 colors Ribbon Wire](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/electronics-parts/10-colors-ribbon-wire.md)
- [3D printed Parts](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts.md)
- [Chassis](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/chassis.md)
- [Wheels (Art Wheel)](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/wheels-art-wheel.md)
- [1602 LCD Mount](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/1602-lcd-mount.md)
- [Arduino UNO Mount](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/arduino-uno-mount.md)
- [9V Battery Holder Mount](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/9v-battery-holder-mount.md)
- [Castor Wheel Mount](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/castor-wheel-mount.md)
- [BO Motor Mount](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/bo-motor-mount.md)
- [IR Sensor Mount](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/ir-sensor-mount.md)
- [Ultrasonic Sensor Mount](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/ultrasonic-sensor-mount.md)
- [SG90/MG90 Servo Motor Mount](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/sg90-mg90-servo-motor-mount.md)
- [Raspberry Pi Mount](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/raspberry-pi-mount.md)
- [Raspberry pi camera Mount](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/raspberry-pi-camera-mount.md)
- [H.P. 3.1](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/h.p.-3.1.md)
- [H.P. 3.2](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/h.p.-3.2.md)
- [H.P. 3.3](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/h.p.-3.3.md)
- [H.P. 2.2](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/h.p.-2.2.md)
- [M.P. 11.5](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/m.p.-11.5.md)
- [M.P. 6.3 L](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/m.p.-6.3-l.md)
- [M.P. 3.3 L](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/m.p.-3.3-l.md)
- [M.P. 3.3 U](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/m.p.-3.3-u.md)
- [M.P. 3.3 Z](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/m.p.-3.3-z.md)
- [Servo Connector](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/3d-printed-parts/servo-connector.md)
- [Mechanical Parts](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/mechanical-parts.md)
- [Castor Wheels](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/mechanical-parts/castor-wheels.md)
- [Allen Keys](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/mechanical-parts/allen-keys.md)
- [M3X6mm CS Screws](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/mechanical-parts/m3x6mm-cs-screws.md)
- [M4X8mm Screws](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/mechanical-parts/m4x8mm-screws.md)
- [M4X10mm Screws](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/mechanical-parts/m4x10mm-screws.md)
- [M4X12mm Screws](https://wiki.electroboffin.com/voidbot/mk1/kit-contents/mechanical-parts/m4x12mm-screws.md)
- [Firmware](https://wiki.electroboffin.com/voidbot/mk1/firmware.md)
- [Arduino](https://wiki.electroboffin.com/voidbot/mk1/firmware/arduino.md)
- [Arduino UNO R4 Wifi](https://wiki.electroboffin.com/voidbot/mk1/firmware/arduino/arduino-uno-r4-wifi.md)
- [Arduino IDE](https://wiki.electroboffin.com/voidbot/mk1/firmware/arduino/arduino-uno-r4-wifi/arduino-ide.md)
- [Basics](https://wiki.electroboffin.com/voidbot/mk1/firmware/arduino/arduino-uno-r4-wifi/arduino-ide/basics.md)
- [Line Following Robot](https://wiki.electroboffin.com/voidbot/mk1/firmware/arduino/arduino-uno-r4-wifi/arduino-ide/line-following-robot.md)
- [Obstacle Avoiding Robot](https://wiki.electroboffin.com/voidbot/mk1/firmware/arduino/arduino-uno-r4-wifi/arduino-ide/obstacle-avoiding-robot.md)
- [BT Controlled Robot](https://wiki.electroboffin.com/voidbot/mk1/firmware/arduino/arduino-uno-r4-wifi/arduino-ide/bt-controlled-robot.md)
- [Obstacle Avoiding robot](https://wiki.electroboffin.com/voidbot/mk1/firmware/arduino/arduino-uno-r4-wifi/arduino-ide/obstacle-avoiding-robot-1.md)
- [Arduino UNO R4 Wifi](https://wiki.electroboffin.com/voidbot/mk1/firmware/arduino-uno-r4-wifi.md)
- [Arduino UNO R3](https://wiki.electroboffin.com/voidbot/mk1/firmware/arduino-uno-r3.md)


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://wiki.electroboffin.com/voidbot/mk1.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.